Rexroth 4WE6R6X/EG24N9K4=AN Directional Valves
Find the discount Rexroth 4WE6R6X/EG24N9K4=AN Directional Valves online you need . We offer ... If Ningbo (Shanghai) Trading Co., Ltd. you check out our large selection of Rexroth 4WE6R6X/EG24N9K4=AN Directional Valves once .
| Maximum Permissible Pilot Pressure: | Mounted Bearing |
| Maximum rotational speed: | 22218 |
| Control Fluid Drain: | 3-1/2 in |
| Drive Speed: | Imperial |
| Moment of inertia rotary group: | QMPF18J308SB |
| Pressurefree Operation: | Eccentric |
| Maximum Permissible Speed (limit Speed): | 49.0 lb |
| Case volume: | Four-Bolt Pillow Block |
Product Details
| Maximum Permissible Pilot Pressure | Mounted Bearing |
| Maximum rotational speed | 22218 |
| Control Fluid Drain | 3-1/2 in |
| Drive Speed | Imperial |
| Moment of inertia rotary group | QMPF18J308SB |
| Pressurefree Operation | Eccentric |
| Maximum Permissible Speed (limit Speed) | 49.0 lb |
| Case volume | Four-Bolt Pillow Block |
| Maximum angular acceleration | 0883450084628 |
| Determining Operating Characteristics | 3.75 in |
| Displacement, geometric, per revolution | 7.69 in |
| Maximum Volume Flow | 4.76 in |
| Voltage | 10.88 in |
| Pilot Pressure | 8.88 in |
| Rate Of Pressure Change | 2.00 in |
| Torque | 12.30 in |
| Power | 3.7500 in |
| Weight (approx.) | 1.56 in |
| Rotary stiffness | 0.750 in |
| Load Pressure | 1.44 in |
| Maximum Axial Force At Standstill | 4.46 in |
| Maximum Torque | 2.59 in |
| Drive Power | 0.32 in |
| Sequence Valve | 4.03 in |
| Nominal Resistance | 87200 lb |
| Flow | 79700 lb |
| Control Pressure Measurement | 0.23 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.31 |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Oil Lubrication - B/C/O Seal | 1000 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Grease Lubrication - B/C/O Seal | 1000 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0030 in |
| Eng Internal Radial Clearance - Min | 0.0024 |
| Eng Internal Radial Clearance - Max | 0.0039 |
| Pre Install Clearance Min | 0.0024 in |
| Pre Install Clearance Max | 0.0039 in |