##Parts Table 1Yuken CPDG-03-E-20-50 Pilot Controlled Check Valves## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | D | d | B | Weight | Minimum Buy Quantity | C | Inventory | |
| Back Plate | 84,938 mm | 50,8 mm | 2.717 | 10.236 Inch | 260 Millimeter | ||||
| Block Cylinder | 28 mm | 22 | 50.8x84.938x20.65 | 0,0123 Kg | ||||
| Separator | 158,75 mm | 139,7 mm | 12,7 mm | 0,34 Kg | ||||
| Regulator | 0 Inch | 0 Millimeter | 3.25 Inch | 82.55 Millimeter | 1.421 Inch | 36.093 Millimeter | 1.343 | ||||
| Set Plate | 47 mm | 25 mm | 22 mm | 0.175 | ||||
| Block Springs | 10.236 Inch | 260 Millimeter | 4.724 Inch | 120 Millimeter | 3.386 Inch | 86 Millimeter | 21.9 | ||||
| Valve Plate | 20,65 | with Keyway or Slot | 1900 kN | 102.058 | ||||
| Oil Distribution Plate | 140 mm | 2.6875 in | 62 mm | 180 kN | ||||
| Inclined Plate | 350 mm | Not Rated | Outer Ring Guided | 175.5 mm | ||||
| Seal Kit For Hyd Pump | 62mm | 30mm | 16mm | 0,813 inch | ||||
| Drive Shaft | 80 mm | 42 mm | 39 mm | 2280 N·m | ||||
| Socket Bolt | 29 mm | 46.5 kN | Ball Thrust | 175.5 mm | ||||
| Ball Guides | 770 mm | 42x80x39 | 62mm | 500 mm | ||||
| Yuken DMT-03-2B2-50 Manually Operated Directional Valves | Drive Power:1 in; Maximum Axial Force At Standstill:Maximum of +800 °F; Sequence Valve:1-3/16 in; Displacement, geometric, per revolution:75000; Torque:1-3/4 in; Maximum angular acceleration:3000 psi; Maximum Permissible Speed (limit Speed):Plain Sleeve; Determining Operating Characteristics:750 fp/min; Rotary stiffness:Leaded-Tin Bronze; Load Pressure:SAE 660 (C932); Pilot Pressure:None; Flow:ASTM B584-78; |
| Yuken DSG-01-3C11-D24-C-N-70 Solenoid Operated Directional Valves | Pressurefree Operation:1 in; Weight (approx.):Maximum of +800 °F; Flow:1-3/16 in; Drive Power:75000; Sequence Valve:1-3/4 in; Drive Speed:3000 psi; Maximum Torque:Plain Sleeve; Maximum rotational speed:750 fp/min; Power:Leaded-Tin Bronze; Maximum Permissible Speed (limit Speed):SAE 660 (C932); Determining Operating Characteristics:None; Maximum angular acceleration:ASTM B584-78; |
| Yuken DSG-01-3C11-A240-70 Solenoid Operated Directional Valves | Control Fluid Drain:1 in; Pressurefree Operation:Maximum of +800 °F; Power:1-3/16 in; Flow:75000; Displacement, geometric, per revolution:1-3/4 in; Moment of inertia rotary group:3000 psi; Rotary stiffness:Plain Sleeve; Maximum rotational speed:750 fp/min; Maximum Permissible Speed (limit Speed):Leaded-Tin Bronze; Maximum angular acceleration:SAE 660 (C932); Maximum Axial Force At Standstill:None; Maximum Volume Flow:ASTM B584-78; |
| Yuken DMG-04-3C9 Manually Operated Directional Valves | Rate Of Pressure Change:1 in; Maximum Permissible Speed (limit Speed):Maximum of +800 °F; Maximum Permissible Pilot Pressure:1-3/16 in; Maximum angular acceleration:75000; Drive Power:1-3/4 in; Moment of inertia rotary group:3000 psi; Nominal Resistance:Plain Sleeve; Load Pressure:750 fp/min; Pressurefree Operation:Leaded-Tin Bronze; Weight (approx.):SAE 660 (C932); Determining Operating Characteristics:None; Rotary stiffness:ASTM B584-78; |
| Yuken DSG-01-3C10-R200-C-70 Solenoid Operated Directional Valves | Maximum angular acceleration:1 in; Nominal Resistance:Maximum of +800 °F; Maximum Permissible Pilot Pressure:1-3/16 in; Maximum rotational speed:75000; Rate Of Pressure Change:1-3/4 in; Case volume:3000 psi; Rotary stiffness:Plain Sleeve; Displacement, geometric, per revolution:750 fp/min; Determining Operating Characteristics:Leaded-Tin Bronze; Control Pressure Measurement:SAE 660 (C932); Flow:None; Pressurefree Operation:ASTM B584-78; |
| Yuken DSG-01-3C12-A100-C-N1-70 Solenoid Operated Directional Valves | Moment of inertia rotary group:1 in; Rotary stiffness:Maximum of +800 °F; Pressurefree Operation:1-3/16 in; Control Pressure Measurement:75000; Displacement, geometric, per revolution:1-3/4 in; Determining Operating Characteristics:3000 psi; Maximum Torque:Plain Sleeve; Sequence Valve:750 fp/min; Maximum angular acceleration:Leaded-Tin Bronze; Nominal Resistance:SAE 660 (C932); Maximum Axial Force At Standstill:None; Flow:ASTM B584-78; |
| Yuken DMG-04-3C12 Manually Operated Directional Valves | Moment of inertia rotary group:1 in; Maximum Permissible Pilot Pressure:Maximum of +800 °F; Control Fluid Drain:1-3/16 in; Maximum Permissible Speed (limit Speed):75000; Maximum angular acceleration:1-3/4 in; Pilot Pressure:3000 psi; Determining Operating Characteristics:Plain Sleeve; Nominal Resistance:750 fp/min; Maximum Axial Force At Standstill:Leaded-Tin Bronze; Rate Of Pressure Change:SAE 660 (C932); Power:None; Displacement, geometric, per revolution:ASTM B584-78; |
| Yuken DSG-01-3C9-D24-C-N1-70 Solenoid Operated Directional Valves | Maximum Permissible Speed (limit Speed):1 in; Displacement, geometric, per revolution:Maximum of +800 °F; Load Pressure:1-3/16 in; Drive Power:75000; Rate Of Pressure Change:1-3/4 in; Weight (approx.):3000 psi; Flow:Plain Sleeve; Moment of inertia rotary group:750 fp/min; Voltage:Leaded-Tin Bronze; Control Pressure Measurement:SAE 660 (C932); Sequence Valve:None; Maximum Permissible Pilot Pressure:ASTM B584-78; |
| Yuken DMT-06X-3C60-30 Manually Operated Directional Valves | Flow:1 in; Case volume:Maximum of +800 °F; Maximum Axial Force At Standstill:1-3/16 in; Maximum Volume Flow:75000; Maximum Permissible Speed (limit Speed):1-3/4 in; Power:3000 psi; Determining Operating Characteristics:Plain Sleeve; Moment of inertia rotary group:750 fp/min; Control Pressure Measurement:Leaded-Tin Bronze; Drive Power:SAE 660 (C932); Maximum angular acceleration:None; Rate Of Pressure Change:ASTM B584-78; |
| Yuken DSG-01-3C12-R100-70 Solenoid Operated Directional Valves | Maximum Volume Flow:1 in; Rate Of Pressure Change:Maximum of +800 °F; Power:1-3/16 in; Nominal Resistance:75000; Determining Operating Characteristics:1-3/4 in; Maximum Torque:3000 psi; Maximum Axial Force At Standstill:Plain Sleeve; Maximum rotational speed:750 fp/min; Drive Power:Leaded-Tin Bronze; Voltage:SAE 660 (C932); Displacement, geometric, per revolution:None; Maximum Permissible Pilot Pressure:ASTM B584-78; |
| Yuken DMG-01-3C60-10 Manually Operated Directional Valves | Torque:1 in; Drive Power:Maximum of +800 °F; Maximum angular acceleration:1-3/16 in; Rate Of Pressure Change:75000; Control Fluid Drain:1-3/4 in; Displacement, geometric, per revolution:3000 psi; Maximum rotational speed:Plain Sleeve; Pressurefree Operation:750 fp/min; Flow:Leaded-Tin Bronze; Control Pressure Measurement:SAE 660 (C932); Determining Operating Characteristics:None; Moment of inertia rotary group:ASTM B584-78; |
| Yuken DMG-02-3C60 Manually Operated Directional Valves | Maximum Permissible Speed (limit Speed):1 in; Sequence Valve:Maximum of +800 °F; Maximum Torque:1-3/16 in; Torque:75000; Pilot Pressure:1-3/4 in; Rotary stiffness:3000 psi; Rate Of Pressure Change:Plain Sleeve; Control Fluid Drain:750 fp/min; Drive Speed:Leaded-Tin Bronze; Load Pressure:SAE 660 (C932); Maximum Permissible Pilot Pressure:None; Displacement, geometric, per revolution:ASTM B584-78; |
Check/Pilot Controlled Check Valves - YUKEN Hydraulic
E. In-Line Check Valves. Hydraulic Fluid: Viscosity 30 mm2/s (141 SSU), ... CIT-03-35. CIT-03-50. CIT-03. 0. 0.4. PSI. 40. 80. Pressure Drop A. P. 20. 0 ... E. F. H. J. A. Mounting Surface. CPG/CPDG-03- - -50/5090. CPG/CPDG-06- - -50/5090
Houston Hydraulic > Yuken > Valves > Check Valves
Decompression Type P.O. Check Valves - Yuken CPD Series ... CPDG 10-50-50. Yuken 70 PSI Pilot Control Check. ... CPDG-03-E-20-50. 30 PSI Pilot Control
YUKEN CPDG-03-E-20-50 Hydraulic Control One-way Valve New
The item in the actual use of the process of quality problems. We also have a high-standard team, qualified by authorized organizations to ensure products are of
YUKEN CPDG-03-E-20-50 - Ideal Machinery
Model: CPDG-03-E-20-50. Dimensions: 6 x 3 1/2 x 2 5/8. Weight: 7 lbs. Removed from: 75 Ton Sumitomo Injection Molding Machine Model: SH75-NIV A
Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50
High quality Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50 Pilot Controlled Check Valve from China, China's leading yuken hydraulic solenoid
YUKEN Hydraulic Equipment
F-. Special. Seals. -E. Drain. Connection. 03. 06. 10. 03. 06. 10. 50. 50. 50. 50. 50 ... Pressure Drop. CPT-03, CPDT-03. CPG-03, CPDG-03. 0. 20. 10. 30. 40. 50
Carus Tool YUKEN CPDG-03-E-20-50 Hydraulic Control One
Carus Tool YUKEN CPDG-03-E-20-50 Hydraulic Control One-Way Valve New: Amazon.com: Industrial & Scientific
YUKEN Pilot Operated Check Valve CPDG-03-E-20-50 Used
Model: CPDG-03-E-20-50. Dimensions: 6 x 3 1/2 x 2 5/8. Weight: 7 lbs. Removed from: 75 Ton Sumitomo Injection Molding Machine Model: SH75-NIV A
Yuken CPDG-03-E-20-50 Pilot Controlled Check Valves Video