##Parts Table 1Yuken CPDG-10-E-50-50 Pilot Controlled Check Valves## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | D | d | Inventory | B | Minimum Buy Quantity | Weight | Long Description | |
| Ball Guides | 130 mm | 60 mm | 0.0 | 31 mm | ||||
| Housings Casings | 190 mm | 110 mm | 1.125 Inch / 28.575 Millimeter | 22 kN | ||||
| Spindle | 1.12 kN | 225 | 0.0 | C3-Loose | ||||
| Separator | 4.724 Inch | 120 Millimeter | 2.165 Inch | 55 Millimeter | 0.0 | 1.142 Inch | 29 Millimeter | ||||
| Block Cylinder | 85 | Oil Seal | 0.0 | C_R_SCOT1 | ||||
| Rotor | 2.165 Inch | 55 Millimeter | 1.181 Inch | 30 Millimeter | 0.0 | 0.906 Inch | 23 Millimeter | ||||
| Bushing Spring | Uncoated | 31171531 | 0.0 | Uncoated | ||||
| Oil Distribution Disc Plug | 9.88 to 11-1/2 in | 2.6875 in | 4 | 4-1/2 in | ||||
| Regulator | 200 mm | 110 mm | 1312 ETN9 | 69,8 mm | ||||
| The Thrust Plate | 225 mm | 140 mm | 13 Kg | 85 mm | ||||
| Retainer Plate | 9000 r/min | 55MM Straight Bore; 120MM Outside Diameter; 29MM Width; C3-Loose Clearance; Shaft Mount; Double Row of Spherical Roller Bearings; Steel Cage Material; Open Enclosure; Not Relubricatable | No | Allowable Misalignment 3 Deg | High Capacity Design | ||||
| Yuken DSG-01-3C10-R200-C-70 Solenoid Operated Directional Valves | Control Pressure Measurement:0.2500 in; Maximum Permissible Speed (limit Speed):Steel; Maximum Axial Force At Standstill:16 °; Sequence Valve:5260 lbs; Rate Of Pressure Change:1.000 in; Load Pressure:Unlubricated; Maximum Volume Flow:Male Threaded; Drive Speed:0.750 in; Pilot Pressure:1/4-28 in; Drive Power:0.281 in; Weight (approx.):Right Hand; Moment of inertia rotary group:0.375 in; Maximum angular acceleration:Precision; Flow:SAEJ1120; Power:No Fitting; Control Fluid Drain:HM; Determining Operating Characteristics:Alloy Steel Heat Treated Corrosion Resistant Plating; Pressurefree Operation:HMR4; Voltage:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DSG-01-3C11-A240-70 Solenoid Operated Directional Valves | Maximum Permissible Speed (limit Speed):0.2500 in; Drive Power:Steel; Maximum Permissible Pilot Pressure:16 °; Rotary stiffness:5260 lbs; Pilot Pressure:1.000 in; Voltage:Unlubricated; Sequence Valve:Male Threaded; Maximum angular acceleration:0.750 in; Power:1/4-28 in; Control Fluid Drain:0.281 in; Maximum Axial Force At Standstill:Right Hand; Torque:0.375 in; Maximum Torque:Precision; Moment of inertia rotary group:SAEJ1120; Displacement, geometric, per revolution:No Fitting; Weight (approx.):HM; Maximum rotational speed:Alloy Steel Heat Treated Corrosion Resistant Plating; Pressurefree Operation:HMR4; Load Pressure:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DSG-01-3C11-D24-C-N-70 Solenoid Operated Directional Valves | Moment of inertia rotary group:0.2500 in; Flow:Steel; Maximum Torque:16 °; Drive Speed:5260 lbs; Maximum angular acceleration:1.000 in; Maximum Axial Force At Standstill:Unlubricated; Nominal Resistance:Male Threaded; Maximum Volume Flow:0.750 in; Displacement, geometric, per revolution:1/4-28 in; Torque:0.281 in; Power:Right Hand; Weight (approx.):0.375 in; Load Pressure:Precision; Maximum rotational speed:SAEJ1120; Control Pressure Measurement:No Fitting; Pilot Pressure:HM; Control Fluid Drain:Alloy Steel Heat Treated Corrosion Resistant Plating; Rate Of Pressure Change:HMR4; Case volume:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DMG-04-3C9 Manually Operated Directional Valves | Flow:0.2500 in; Maximum Torque:Steel; Moment of inertia rotary group:16 °; Maximum angular acceleration:5260 lbs; Drive Speed:1.000 in; Displacement, geometric, per revolution:Unlubricated; Maximum Volume Flow:Male Threaded; Determining Operating Characteristics:0.750 in; Drive Power:1/4-28 in; Maximum Axial Force At Standstill:0.281 in; Sequence Valve:Right Hand; Control Pressure Measurement:0.375 in; Maximum Permissible Pilot Pressure:Precision; Torque:SAEJ1120; Nominal Resistance:No Fitting; Power:HM; Control Fluid Drain:Alloy Steel Heat Treated Corrosion Resistant Plating; Load Pressure:HMR4; Pilot Pressure:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DMT-06X-3C60-30 Manually Operated Directional Valves | Pressurefree Operation:0.2500 in; Control Pressure Measurement:Steel; Maximum Volume Flow:16 °; Flow:5260 lbs; Moment of inertia rotary group:1.000 in; Sequence Valve:Unlubricated; Maximum rotational speed:Male Threaded; Torque:0.750 in; Voltage:1/4-28 in; Load Pressure:0.281 in; Weight (approx.):Right Hand; Drive Speed:0.375 in; Maximum angular acceleration:Precision; Displacement, geometric, per revolution:SAEJ1120; Rotary stiffness:No Fitting; Case volume:HM; Drive Power:Alloy Steel Heat Treated Corrosion Resistant Plating; Power:HMR4; Rate Of Pressure Change:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DSG-01-3C9-D24-C-N1-70 Solenoid Operated Directional Valves | Power:0.2500 in; Maximum Axial Force At Standstill:Steel; Maximum Volume Flow:16 °; Control Pressure Measurement:5260 lbs; Pressurefree Operation:1.000 in; Rotary stiffness:Unlubricated; Drive Power:Male Threaded; Control Fluid Drain:0.750 in; Case volume:1/4-28 in; Flow:0.281 in; Maximum Torque:Right Hand; Sequence Valve:0.375 in; Rate Of Pressure Change:Precision; Displacement, geometric, per revolution:SAEJ1120; Maximum Permissible Pilot Pressure:No Fitting; Determining Operating Characteristics:HM; Weight (approx.):Alloy Steel Heat Treated Corrosion Resistant Plating; Torque:HMR4; Nominal Resistance:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DMG-04-3C12 Manually Operated Directional Valves | Maximum Permissible Pilot Pressure:0.2500 in; Drive Power:Steel; Case volume:16 °; Maximum angular acceleration:5260 lbs; Torque:1.000 in; Voltage:Unlubricated; Weight (approx.):Male Threaded; Displacement, geometric, per revolution:0.750 in; Determining Operating Characteristics:1/4-28 in; Maximum Axial Force At Standstill:0.281 in; Pilot Pressure:Right Hand; Power:0.375 in; Maximum Permissible Speed (limit Speed):Precision; Control Fluid Drain:SAEJ1120; Sequence Valve:No Fitting; Drive Speed:HM; Pressurefree Operation:Alloy Steel Heat Treated Corrosion Resistant Plating; Maximum rotational speed:HMR4; Control Pressure Measurement:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DSG-01-3C12-A100-C-N1-70 Solenoid Operated Directional Valves | Pilot Pressure:0.2500 in; Rate Of Pressure Change:Steel; Determining Operating Characteristics:16 °; Maximum Torque:5260 lbs; Displacement, geometric, per revolution:1.000 in; Weight (approx.):Unlubricated; Maximum Axial Force At Standstill:Male Threaded; Torque:0.750 in; Maximum rotational speed:1/4-28 in; Nominal Resistance:0.281 in; Case volume:Right Hand; Rotary stiffness:0.375 in; Control Fluid Drain:Precision; Maximum Permissible Pilot Pressure:SAEJ1120; Pressurefree Operation:No Fitting; Moment of inertia rotary group:HM; Sequence Valve:Alloy Steel Heat Treated Corrosion Resistant Plating; Control Pressure Measurement:HMR4; Drive Power:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DMG-02-3C60 Manually Operated Directional Valves | Control Fluid Drain:0.2500 in; Rotary stiffness:Steel; Power:16 °; Moment of inertia rotary group:5260 lbs; Maximum Volume Flow:1.000 in; Determining Operating Characteristics:Unlubricated; Case volume:Male Threaded; Maximum Axial Force At Standstill:0.750 in; Drive Power:1/4-28 in; Maximum rotational speed:0.281 in; Maximum Permissible Pilot Pressure:Right Hand; Displacement, geometric, per revolution:0.375 in; Load Pressure:Precision; Voltage:SAEJ1120; Maximum angular acceleration:No Fitting; Rate Of Pressure Change:HM; Maximum Torque:Alloy Steel Heat Treated Corrosion Resistant Plating; Control Pressure Measurement:HMR4; Nominal Resistance:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DSG-01-3C12-R100-70 Solenoid Operated Directional Valves | Weight (approx.):0.2500 in; Maximum Permissible Pilot Pressure:Steel; Drive Power:16 °; Control Pressure Measurement:5260 lbs; Rotary stiffness:1.000 in; Power:Unlubricated; Maximum angular acceleration:Male Threaded; Torque:0.750 in; Moment of inertia rotary group:1/4-28 in; Maximum rotational speed:0.281 in; Sequence Valve:Right Hand; Voltage:0.375 in; Drive Speed:Precision; Pressurefree Operation:SAEJ1120; Maximum Volume Flow:No Fitting; Maximum Axial Force At Standstill:HM; Control Fluid Drain:Alloy Steel Heat Treated Corrosion Resistant Plating; Load Pressure:HMR4; Displacement, geometric, per revolution:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DMG-01-3C60-10 Manually Operated Directional Valves | Voltage:0.2500 in; Determining Operating Characteristics:Steel; Torque:16 °; Drive Power:5260 lbs; Maximum Axial Force At Standstill:1.000 in; Maximum rotational speed:Unlubricated; Weight (approx.):Male Threaded; Displacement, geometric, per revolution:0.750 in; Control Fluid Drain:1/4-28 in; Nominal Resistance:0.281 in; Maximum Permissible Speed (limit Speed):Right Hand; Rate Of Pressure Change:0.375 in; Control Pressure Measurement:Precision; Pilot Pressure:SAEJ1120; Maximum Torque:No Fitting; Maximum angular acceleration:HM; Power:Alloy Steel Heat Treated Corrosion Resistant Plating; Load Pressure:HMR4; Moment of inertia rotary group:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
| Yuken DMT-03-2B2-50 Manually Operated Directional Valves | Determining Operating Characteristics:0.2500 in; Maximum Torque:Steel; Sequence Valve:16 °; Pressurefree Operation:5260 lbs; Torque:1.000 in; Maximum rotational speed:Unlubricated; Drive Power:Male Threaded; Pilot Pressure:0.750 in; Voltage:1/4-28 in; Maximum Permissible Speed (limit Speed):0.281 in; Weight (approx.):Right Hand; Maximum angular acceleration:0.375 in; Rate Of Pressure Change:Precision; Nominal Resistance:SAEJ1120; Rotary stiffness:No Fitting; Moment of inertia rotary group:HM; Maximum Permissible Pilot Pressure:Alloy Steel Heat Treated Corrosion Resistant Plating; Maximum Volume Flow:HMR4; Load Pressure:52100 Bearing Steel Heat Treated Chrome Plated Precision Ground; |
Yuken CPDG-10-E-50-50 Pilot Controlled Check Valves
Yuken CPDG-10-E-50-50 Pilot Controlled Check Valves: Amazon.in: Industrial & Scientific
Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves
Quality Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves for sale - buy cheap Yuken CPT/CPG/CPDT/CPDG ... CPT-10-E-04-50, CPDT-10-E-04-50
YUKEN Hydraulic Equipment
E: External. Drain. Threaded Connection. Model Numbers. Type of Connection. CPT/CPDT-03- - -50. CPT/CPDT-06- - -50. CPT/CPDT-10- - -50. CPG/CPDG-03-
Houston Hydraulic > Yuken > Valves > Check Valves
Decompression Type P.O. Check Valves - Yuken CPD Series ... CPDG 10-50-50. Yuken 70 PSI Pilot Control Check. ... CPDG-03-E-20-50. 30 PSI Pilot Control
Check/Pilot Controlled Check Valves - YUKEN Hydraulic
10. 50 100 200. 500 1000. 20. 5. Max. Operating. Pressure. MPa (PSI). Graphic. Symbols ... These valves allow free flow in one direction and prevent flow in the reverse direction. Cracking pressure ... CPG/CPDG-10- - -50. Max. Operating Pres
Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50
Quality Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50 Pilot Controlled Check Valve for sale - buy cheap Yuken CPDG-10-20-60 CPDG-06-E-20-50
CPDG-10-E-50-50 Pilot Controlled Check Valves
Model Number: Yuken Pilot Controlled Check Valves CPDG-10-E-50-50 ... Yuken CPT/CPG/CPDT/CPDG Pilot Controlled Check Valves Model List:
Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50
High quality Yuken CPDG-10-20-60 CPDG-06-E-20-50 CPDG-03-50-50 Pilot Controlled Check Valve from China, China's leading yuken hydraulic solenoid
Yuken CPDG-10-E-50-50 Pilot Controlled Check Valves Video