##Parts Table 1Yuken S-BSG-10-V-2B3B-R200-N-52 Solenoid Controlled Relief Valves## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | Weight | D | B | Minimum Buy Quantity | Inch - Metric | Long Description | |
| Ball Joint | 45 mm | 2.45 kg | 4300 r/min | 42.8 mm | ||||
| Oil Distribution Disc Plug | 95 mm | 24.91 kg | 5 mm | 103 mm | ||||
| Cylinder Blocks | 3 Inch | 76.2 Millimeter | 0.695 | 3.75 Inch | 95.25 Millimeter | 1.75 Inch | 44.45 Millimeter | ||||
| Skeleton Oil Seal | 4.438 Inch | 112.725 Millimeter | 46.308 | 6.25 Inch | 158.75 Millimeter | Needle Roller Bearing | ||||
| Guide Ball | 58.9 mm | 0.277 | 240 mm | 1.500 | ||||
| Disc Springs | 1.438 Inch | 36.525 Millimeter | 2.088 | 1.937 Inch | 49.2 Millimeter | +.010 / 0.010 | ||||
| Cylinder | 102 | - | 1.438 Inch | 36.525 Millimeter | Contact Seal | ||||
| Bushing Spring | 2.2500 in | -65 to +250 °F | 3.996 in | Sealed | ||||
| The Thrust Plate | Ball Bearing | 0.875 Inch | 22.225 Millimeter | 97 kN | No | ||||
| Spacer | 73,817 mm | 82,7 mm | 112,712 mm | 25,4 mm | ||||
| Retainer Plate | 240 mm | Double Row | Double Collar | With Set Screw | 440 mm | 72 mm | ||||
| Servo Piston | Inch | 3 Inch | 76.2 Millimeter | 3" Bore; 3-3/4" Outside Diameter; 1-3/4" Width; Needle Roller Bearing; Roller Assembly with Outer Ring - No Inner Ring; 2 Seals Enclosure; No Self Aligning; No Retainer; Double Row of R | 730 r/min | ||||
| Push Rod | Roller Assembly with Outer Ring - No Inner Ring | 2.088 | 79 mm | 97 kN | ||||
| Yuken DMT-03-2B2-50 Manually Operated Directional Valves | Displacement, geometric, per revolution:1.1250 in; Drive Power:2150 lbf; Pressurefree Operation:4.6094 in; Torque:1080 lbf; Weight (approx.):5.8125 in; Moment of inertia rotary group:Contact with Flinger; Maximum angular acceleration:Round; Nominal Resistance:0.866 in; Maximum rotational speed:Standard Duty; Sequence Valve:Lubrication Fitting; Maximum Axial Force At Standstill:Two-Bolt Flange; Power:UENFL200B; Flow:PBT Thermoplastic; Maximum Torque:UE206-18; Rate Of Pressure Change:Accu-Loc; |
| Yuken DSG-01-3C9-D24-C-N1-70 Solenoid Operated Directional Valves | Load Pressure:1.1250 in; Flow:2150 lbf; Sequence Valve:4.6094 in; Drive Speed:1080 lbf; Pressurefree Operation:5.8125 in; Pilot Pressure:Contact with Flinger; Rotary stiffness:Round; Case volume:0.866 in; Maximum Axial Force At Standstill:Standard Duty; Maximum Torque:Lubrication Fitting; Nominal Resistance:Two-Bolt Flange; Maximum Permissible Speed (limit Speed):UENFL200B; Maximum Volume Flow:PBT Thermoplastic; Maximum angular acceleration:UE206-18; Rate Of Pressure Change:Accu-Loc; |
| Yuken DSG-01-3C12-A100-C-N1-70 Solenoid Operated Directional Valves | Voltage:1.1250 in; Weight (approx.):2150 lbf; Case volume:4.6094 in; Load Pressure:1080 lbf; Drive Speed:5.8125 in; Drive Power:Contact with Flinger; Rotary stiffness:Round; Control Pressure Measurement:0.866 in; Power:Standard Duty; Maximum Axial Force At Standstill:Lubrication Fitting; Control Fluid Drain:Two-Bolt Flange; Flow:UENFL200B; Maximum rotational speed:PBT Thermoplastic; Maximum Permissible Pilot Pressure:UE206-18; Moment of inertia rotary group:Accu-Loc; |
| Yuken DSG-01-3C11-A240-70 Solenoid Operated Directional Valves | Maximum Permissible Pilot Pressure:1.1250 in; Control Fluid Drain:2150 lbf; Determining Operating Characteristics:4.6094 in; Voltage:1080 lbf; Displacement, geometric, per revolution:5.8125 in; Rotary stiffness:Contact with Flinger; Drive Power:Round; Power:0.866 in; Rate Of Pressure Change:Standard Duty; Drive Speed:Lubrication Fitting; Load Pressure:Two-Bolt Flange; Maximum rotational speed:UENFL200B; Pilot Pressure:PBT Thermoplastic; Maximum Volume Flow:UE206-18; Maximum Permissible Speed (limit Speed):Accu-Loc; |
| Yuken DMG-02-3C60 Manually Operated Directional Valves | Drive Speed:1.1250 in; Torque:2150 lbf; Drive Power:4.6094 in; Weight (approx.):1080 lbf; Nominal Resistance:5.8125 in; Maximum rotational speed:Contact with Flinger; Maximum Permissible Pilot Pressure:Round; Maximum Permissible Speed (limit Speed):0.866 in; Maximum Torque:Standard Duty; Rotary stiffness:Lubrication Fitting; Moment of inertia rotary group:Two-Bolt Flange; Determining Operating Characteristics:UENFL200B; Control Fluid Drain:PBT Thermoplastic; Maximum angular acceleration:UE206-18; Sequence Valve:Accu-Loc; |
| Yuken DMG-01-3C60-10 Manually Operated Directional Valves | Maximum Permissible Speed (limit Speed):1.1250 in; Displacement, geometric, per revolution:2150 lbf; Rotary stiffness:4.6094 in; Control Fluid Drain:1080 lbf; Maximum angular acceleration:5.8125 in; Maximum Volume Flow:Contact with Flinger; Sequence Valve:Round; Determining Operating Characteristics:0.866 in; Flow:Standard Duty; Drive Power:Lubrication Fitting; Nominal Resistance:Two-Bolt Flange; Voltage:UENFL200B; Maximum Axial Force At Standstill:PBT Thermoplastic; Power:UE206-18; Maximum Permissible Pilot Pressure:Accu-Loc; |
| Yuken DSG-01-3C10-R200-C-70 Solenoid Operated Directional Valves | Maximum Volume Flow:1.1250 in; Rotary stiffness:2150 lbf; Voltage:4.6094 in; Control Pressure Measurement:1080 lbf; Moment of inertia rotary group:5.8125 in; Pilot Pressure:Contact with Flinger; Nominal Resistance:Round; Torque:0.866 in; Case volume:Standard Duty; Weight (approx.):Lubrication Fitting; Pressurefree Operation:Two-Bolt Flange; Load Pressure:UENFL200B; Maximum Axial Force At Standstill:PBT Thermoplastic; Sequence Valve:UE206-18; Displacement, geometric, per revolution:Accu-Loc; |
| Yuken DMG-04-3C9 Manually Operated Directional Valves | Nominal Resistance:1.1250 in; Determining Operating Characteristics:2150 lbf; Moment of inertia rotary group:4.6094 in; Drive Speed:1080 lbf; Control Pressure Measurement:5.8125 in; Rate Of Pressure Change:Contact with Flinger; Sequence Valve:Round; Maximum angular acceleration:0.866 in; Voltage:Standard Duty; Maximum Permissible Pilot Pressure:Lubrication Fitting; Torque:Two-Bolt Flange; Maximum Permissible Speed (limit Speed):UENFL200B; Weight (approx.):PBT Thermoplastic; Maximum Volume Flow:UE206-18; Control Fluid Drain:Accu-Loc; |
| Yuken DMT-06X-3C60-30 Manually Operated Directional Valves | Torque:1.1250 in; Drive Speed:2150 lbf; Load Pressure:4.6094 in; Determining Operating Characteristics:1080 lbf; Pilot Pressure:5.8125 in; Control Fluid Drain:Contact with Flinger; Displacement, geometric, per revolution:Round; Maximum Volume Flow:0.866 in; Voltage:Standard Duty; Flow:Lubrication Fitting; Maximum angular acceleration:Two-Bolt Flange; Moment of inertia rotary group:UENFL200B; Maximum Axial Force At Standstill:PBT Thermoplastic; Control Pressure Measurement:UE206-18; Rate Of Pressure Change:Accu-Loc; |
| Yuken DSG-01-3C11-D24-C-N-70 Solenoid Operated Directional Valves | Power:1.1250 in; Maximum Axial Force At Standstill:2150 lbf; Moment of inertia rotary group:4.6094 in; Flow:1080 lbf; Maximum Permissible Speed (limit Speed):5.8125 in; Weight (approx.):Contact with Flinger; Maximum Volume Flow:Round; Determining Operating Characteristics:0.866 in; Pilot Pressure:Standard Duty; Nominal Resistance:Lubrication Fitting; Displacement, geometric, per revolution:Two-Bolt Flange; Load Pressure:UENFL200B; Drive Power:PBT Thermoplastic; Maximum Torque:UE206-18; Rate Of Pressure Change:Accu-Loc; |
| Yuken DSG-01-3C12-R100-70 Solenoid Operated Directional Valves | Sequence Valve:1.1250 in; Determining Operating Characteristics:2150 lbf; Maximum Permissible Speed (limit Speed):4.6094 in; Displacement, geometric, per revolution:1080 lbf; Maximum Axial Force At Standstill:5.8125 in; Control Pressure Measurement:Contact with Flinger; Maximum rotational speed:Round; Nominal Resistance:0.866 in; Load Pressure:Standard Duty; Pressurefree Operation:Lubrication Fitting; Maximum angular acceleration:Two-Bolt Flange; Flow:UENFL200B; Control Fluid Drain:PBT Thermoplastic; Drive Speed:UE206-18; Moment of inertia rotary group:Accu-Loc; |
| Yuken DMG-04-3C12 Manually Operated Directional Valves | Rate Of Pressure Change:1.1250 in; Maximum Permissible Pilot Pressure:2150 lbf; Maximum angular acceleration:4.6094 in; Drive Power:1080 lbf; Displacement, geometric, per revolution:5.8125 in; Power:Contact with Flinger; Weight (approx.):Round; Maximum Torque:0.866 in; Maximum Permissible Speed (limit Speed):Standard Duty; Pressurefree Operation:Lubrication Fitting; Nominal Resistance:Two-Bolt Flange; Pilot Pressure:UENFL200B; Determining Operating Characteristics:PBT Thermoplastic; Torque:UE206-18; Maximum Axial Force At Standstill:Accu-Loc; |
Yuken S-BSG-03-2B3B-A240-N1-53 Low Noise Solenoid
Yuken Low Noise Type Solenoid Controlled Relief Valves. Sub-plate Mounting:S-BSG-03 ... One collar is equivalent to 10 MPa (1450 PSI). With a small flow, the ... S-BSG-03-2B3B-R200-R-52, 6.5KG ... S-BSG-03-V-2B3B-A240-N-52, 6.5KG
YUKEN Hydraulic Equipment
S-BG. 10. 06. 03. S-BSG. BST/BSG. HT/HG. HCT/HCG. 03. 03. 03. 03. 03. RBG. UBGR. C ... V alves. C. Remote Control Relief Valves. Model Numbers. Threaded ... Handle. 21(.83). Dia. 10(.39). Max. INC. Pressure Adjustment. Handle. 52. (2.05) ... 2B3B. 2B2B. 2B2. 3C2. 3C3. None: Terminal. Box Type. N: With. Plug-in
S-BSG-10-2B3B-D24-N-52 Low Noise Type Solenoid Controlled
S-BSG-10-2B3B-D24-N-52 Low Noise Type Solenoid Controlled Relief Valves for sale,Saar HK Electronic Limited provide ... S-BSG-06-V-3C2-R200-R-52
Low Noise Type Solenoid Controlled Relief Valves - YUKEN
It is used for no-load pump operation by using electric signals or, together with a ... S-BSG-10. BGM-03-20. BGM-03X-20. BGM-06-20. BGM-06X-20. BGM-10-20 ... restrictor in vent types 2B3A and 2B3B added between a relief valve and a ... (design 52) with respect to specifications, exterior shape and mounting dimensions
S-BSG-10-V-3C2-D24-N-52 Low Noise Type Solenoid
Quality S-BSG-10-V-3C2-D24-N-52 Low Noise Type Solenoid Controlled Relief Valves for sale - buy cheap ... Yuken S-BSG Series Low Noise Type Solenoid Controlled Relief Valves. Low Noise Type Solenoid ... S-BSG-06-2B3B-R200-R-52
S-BSG-10-2B3B-D24-N-52 Low Noise Type Solenoid
S-BSG-10-2B3B-D24-N-52 Low Noise Type ... Yuken S-BSG Series Low Noise Type Solenoid Controlled Relief Valves ... S-BSG-10-V-2B3B-R200-N-52
Yuken Engineering Information - FLUID POWER
solenoid, or by connecting pilot relief valves to the solenoid valve ports. ... No. 10-24 UNC. Lock Nut 14(.55) Hex. Two Collars. (1.97). 50. 26(1.02). 52. (2 .05)
Solenoid Controlled Relief Valves - YUKEN Hydraulic
Piping between the two is eliminated as the solenoid valve is directly ... 2B3B. 2B2B. 2B2. 3C2. 3C3. None: Terminal. Box Type. N: With. Plug-in ... R100, R200 ... Controlled. Relief. V alves. C. Solenoid Controlled Relief Valves. Valve Model ... N. American Design Std. Socket Head Cap Screw. BSG-03. BSG-06. BSG-10
Yuken S-BSG-10-V-2B3B-R200-N-52 Solenoid Controlled Relief Valves Video