##Parts Table 1Yuken DSG-01-3C4-D48-70 Solenoid Operated Directional Valves## | ||||||||
|---|---|---|---|---|---|---|---|---|
| No. | d | D | B | Number of Bearings | Weight | Bearing Used | Type | |
| Socket Bolt | 140 mm | 250 mm | 16 | 35 ～ 50 | ||||
| Valve Plate | 30,162 mm | 68,262 mm | 10.319 mm | 7 Days | ||||
| Oil Distribution Plate | 105 mm | Deep Groove Ball Bearings | 112 mm | Maximum of +800 °F | ||||
| Rod | Single Lip, Spring Loaded With Inner Case | 6 | 960 kN | 1/2 in | ||||
| Spindle | 2.756 Inch | 70 Millimeter | 3.937 Inch | 100 Millimeter | 1.26 Inch | 32 Millimeter | 2 (1 Pair) | ||||
| Valve Plates | 1.01 | 30,162 mm | 14.1 cm3 | 106.13 mm | ||||
| Shoe Piston | 0.4375 in | 130 mm | 95.3 mm | 112 mm | ||||
| Pump Right Rotating Group | 1.7500 in | 3.6200 in | 3.0300 in | 57,84 mm | ||||
| Cylinder Blocks | 1/2 in | 5/8 in | 27.8 Kg | 14.1 cm3 | ||||
| Saddle Bearing | 112 | 105 mm | 0.98 kN | Double | ||||
| Drive Shaft | 95.3 mm | 1.5 | Light | Single | ||||
| Bushing Spring | 90 mm | 140 mm | 24 mm | 1820 kN | ||||
| Barrel Washer | 45.5 mm | Yes (with retaining ring) | 960 kN | M30 | ||||
| Yuken DMT-03-2B2-50 Manually Operated Directional Valves | Rate Of Pressure Change:5/8 in; Maximum Permissible Pilot Pressure:Epoxy Fiberglass; Flow:3/4 in; Displacement, geometric, per revolution:-212 to +350 °F; Control Fluid Drain:3/8 in; Pressurefree Operation:20000; Maximum Torque:Plain Sleeve; Maximum Axial Force At Standstill:34300 psi; Voltage:PTFE Lining; Rotary stiffness:150 fp/min; Maximum Volume Flow:None; |
| Yuken DSG-01-3C9-D24-C-N1-70 Solenoid Operated Directional Valves | Nominal Resistance:5/8 in; Voltage:Epoxy Fiberglass; Control Fluid Drain:3/4 in; Drive Power:-212 to +350 °F; Sequence Valve:3/8 in; Load Pressure:20000; Maximum Volume Flow:Plain Sleeve; Maximum angular acceleration:34300 psi; Rotary stiffness:PTFE Lining; Maximum Permissible Speed (limit Speed):150 fp/min; Weight (approx.):None; |
| Yuken DSG-01-3C10-R200-C-70 Solenoid Operated Directional Valves | Pressurefree Operation:5/8 in; Drive Power:Epoxy Fiberglass; Maximum angular acceleration:3/4 in; Torque:-212 to +350 °F; Maximum Axial Force At Standstill:3/8 in; Moment of inertia rotary group:20000; Maximum Permissible Speed (limit Speed):Plain Sleeve; Maximum rotational speed:34300 psi; Rotary stiffness:PTFE Lining; Drive Speed:150 fp/min; Rate Of Pressure Change:None; |
| Yuken DMG-02-3C60 Manually Operated Directional Valves | Drive Power:5/8 in; Maximum Axial Force At Standstill:Epoxy Fiberglass; Torque:3/4 in; Rate Of Pressure Change:-212 to +350 °F; Maximum angular acceleration:3/8 in; Maximum Torque:20000; Moment of inertia rotary group:Plain Sleeve; Sequence Valve:34300 psi; Case volume:PTFE Lining; Power:150 fp/min; Voltage:None; |
| Yuken DMG-01-3C60-10 Manually Operated Directional Valves | Maximum Axial Force At Standstill:5/8 in; Power:Epoxy Fiberglass; Maximum Torque:3/4 in; Drive Power:-212 to +350 °F; Pilot Pressure:3/8 in; Control Pressure Measurement:20000; Torque:Plain Sleeve; Displacement, geometric, per revolution:34300 psi; Flow:PTFE Lining; Voltage:150 fp/min; Determining Operating Characteristics:None; |
| Yuken DSG-01-3C12-A100-C-N1-70 Solenoid Operated Directional Valves | Control Pressure Measurement:5/8 in; Voltage:Epoxy Fiberglass; Determining Operating Characteristics:3/4 in; Maximum Torque:-212 to +350 °F; Rate Of Pressure Change:3/8 in; Maximum Permissible Speed (limit Speed):20000; Maximum Axial Force At Standstill:Plain Sleeve; Maximum Volume Flow:34300 psi; Sequence Valve:PTFE Lining; Maximum Permissible Pilot Pressure:150 fp/min; Drive Power:None; |
| Yuken DSG-01-3C11-A240-70 Solenoid Operated Directional Valves | Load Pressure:5/8 in; Maximum angular acceleration:Epoxy Fiberglass; Case volume:3/4 in; Maximum Volume Flow:-212 to +350 °F; Maximum Permissible Pilot Pressure:3/8 in; Maximum Axial Force At Standstill:20000; Pressurefree Operation:Plain Sleeve; Power:34300 psi; Sequence Valve:PTFE Lining; Maximum Permissible Speed (limit Speed):150 fp/min; Control Pressure Measurement:None; |
| Yuken DSG-01-3C12-R100-70 Solenoid Operated Directional Valves | Power:5/8 in; Sequence Valve:Epoxy Fiberglass; Displacement, geometric, per revolution:3/4 in; Drive Speed:-212 to +350 °F; Control Fluid Drain:3/8 in; Maximum rotational speed:20000; Flow:Plain Sleeve; Rotary stiffness:34300 psi; Drive Power:PTFE Lining; Voltage:150 fp/min; Maximum Axial Force At Standstill:None; |
| Yuken DMG-04-3C9 Manually Operated Directional Valves | Drive Power:5/8 in; Flow:Epoxy Fiberglass; Displacement, geometric, per revolution:3/4 in; Torque:-212 to +350 °F; Control Fluid Drain:3/8 in; Drive Speed:20000; Weight (approx.):Plain Sleeve; Maximum Permissible Speed (limit Speed):34300 psi; Determining Operating Characteristics:PTFE Lining; Moment of inertia rotary group:150 fp/min; Control Pressure Measurement:None; |
| Yuken DSG-01-3C11-D24-C-N-70 Solenoid Operated Directional Valves | Voltage:5/8 in; Sequence Valve:Epoxy Fiberglass; Control Fluid Drain:3/4 in; Load Pressure:-212 to +350 °F; Torque:3/8 in; Control Pressure Measurement:20000; Power:Plain Sleeve; Maximum Axial Force At Standstill:34300 psi; Displacement, geometric, per revolution:PTFE Lining; Flow:150 fp/min; Rate Of Pressure Change:None; |
| Yuken DMT-06X-3C60-30 Manually Operated Directional Valves | Drive Speed:5/8 in; Power:Epoxy Fiberglass; Displacement, geometric, per revolution:3/4 in; Pilot Pressure:-212 to +350 °F; Load Pressure:3/8 in; Maximum rotational speed:20000; Maximum Permissible Speed (limit Speed):Plain Sleeve; Case volume:34300 psi; Control Fluid Drain:PTFE Lining; Torque:150 fp/min; Maximum Permissible Pilot Pressure:None; |
| Yuken DMG-04-3C12 Manually Operated Directional Valves | Voltage:5/8 in; Case volume:Epoxy Fiberglass; Drive Power:3/4 in; Maximum rotational speed:-212 to +350 °F; Determining Operating Characteristics:3/8 in; Moment of inertia rotary group:20000; Maximum Permissible Pilot Pressure:Plain Sleeve; Control Fluid Drain:34300 psi; Sequence Valve:PTFE Lining; Displacement, geometric, per revolution:150 fp/min; Maximum Torque:None; |
DSG-01-70 - Yuken by ALA Industries
SOLENOID OPERATED DIRECTIONAL VALVES - DSG-01 70 / 7090 SERIES ... D48. 48. 43.2~52.8. 0.61. D100. 100. 90~110. 0.296. D110. 110. 99~121. 0.27
DSG-01-3C40-D24-70 Solenoid Operated Directional Valves
Yuken DSG-01 Series 1/8 Solenoid Operated Directional Valves. DSG-01-3C40-D24-70 Solenoid ... DSG-01-3C4-D48-70, DSG-01-3C11-R200-C-N-70
DSG-01-3C4-D48-70 Solenoid Operated Directional Valves
DSG-01-3C4-D48-70 Solenoid Operated Directional Valves. Yuken DSG-01 Series 1/8 Solenoid Operated Directional Valves Model Ordering Code:
Yuken DSG-01 Valves - All World Machinery
please consult us or your Yuken distributors. Standard ... Viscosity: 15 to 400 mm /s (77 to 1800 SSU), Temperature: -15 to +70°C (5 to 160°F) ... DSG-01-3C4
1/8 Solenoid Operated Directional Valves, DSG-01 Series
D48. R100. R200. 80 - 110. 90 - 120. 96 - 132. 108 - 144. 160 - 220. 180 - 240 ... 70. ―. 10. DSG−01−3C2. DSG−01−3C3. DSG−01−3C4. DSG−01−3C40
1-8-Solenoid-Operated-Directional-Valves-DSG-01-Series.pdf
Low Wattage(14W)| L-DSG-01-2D2-*-70/7090. Type 1 ... D48. 43.2 - 52.8. R100. 100. AC+DC Rectified (R). 90 - 110. R200. 200 L 180 - 220. *1. AC solenoid is not ... DSG-01-3C4. 90 90. 42 26 20 62 48 ... locating pin, please consult Yuken
Houston Hydraulic > Yuken > Valves > Directional Control
DSG-01-3C4-A100-70. 4 Way / 3 Pos., Spring Centered, JIS Bolts. Size: D03 ... DSG-01-3C4-D48-C-7090. 4 Way / 3 Pos., Spring Centered, , Push Button & Lock
1/8 Solenoid Operated Directional Valves, DSG-01 Series
These DSG-005 series solenoid directional valves are the pro-ducts ... DSG-01-2D2- -70/7090 ... D48. R: DC). R100. R200. 2. (AC→. In case of the special two position valve, please ... DSG−01−3C4 ... locating pin, please consult Yuken
Yuken DSG-01-3C4-D48-70 Solenoid Operated Directional Valves Video